Note:  All specifications listed or linked to this page are for reference purposes only.  Specifications listed below were based on the most current information provided by ANSI, ASME, etc. at the time this reference page was developed.  Final verification of a specifications is the customers responsibility.

Anchors

E-Z® Anchor      Plastic Hollow Wall     Hammer Drive       Nail-In       Split Drive

Toggle               Lead Wood Shield

Bolts, Hex Cap Screws and Studs

Cap Screws Grade 2 & Stainless     Material Specs

Cap Screws Grade 5 & 8                Material Specs

A325 & A490 Structural

A307 Bolts                              

Hot Dip Bolts

Bolt Head Dimensions

Tap Bolt                                        Tap Bolt Material 

Carriage Bolt                                 Material Specs

Carriage Bolt Short Neck                

Carriage Bolt Hot Dip Galv

Hex Flange Bolt                             

Plow Bolt                                       Plow Bolt Cont.

Elevator Bolt                                 

12 Pt. Flange Bolt     

Frame Bolt  

T-Head Bolt

Bits- Insert, Power and Bit Holders & Nutserts

Phillips Drive        Slotted         Torx®         Pozidriv®         Square      Bit Holders

Clinch Fasteners

12 Rib Stud    12 Rib Stud Cont.

 

Construction Fasteners

TEK® Self Drill     TEK® Continued

Hanger

Dowell Screw     Hanger Bolt

Machine Screws

FIllister  Threads      Flat        Flat Undercut & Flat Torx     Hex & Hex Washer   

Oval     Oval Undercut    Pan    Phillips Binder     Round        Torx Pan 

Mechanical Performance   

Nuts

Acorn      Automation     Clinch     Castle      Coupling       Panel      Toggle    T-Nut 

Finished Hex Grade 2      Finished Hex Grade 5 & 8         Grade 5 & 8 Material Specs 

Finished Hex Hot Dip       Finished Hex Jam                    Heavy Hex

Machine Screw                Slotted Hex                             Wing     

Weld Nut Single Projection    Weld Nut Multiple Projections

Locknuts

Hex Reversible     Keps®        Nylon Insert     Nylon Insert Thin    Prevailing Torque Types GT & C  Serrated Flange

Tinnerman® Style Speed Nuts

Type U    Type J    Flat

Palnut® Threaded Fasteners

PINS

Roll Pins          Taper Pins        Cotter Pins       Dowel Pins        Clevis Pins    Groove Pins

Pipe Plugs

Flush Seal        Dry Seal

Retaining Rings

Internal "HO"         Internal "HO" Material        

External "SH"         External "SH" Material

E Rings

Rivets & Riveting Tools

Blind Rivets: 

All Aluminum    All Steel    Alum/Steel    All Stainless    

Multi-Grip   Large Flange   Large Flange, cont.

Part Number Identification Chart

Semi-Tubular:  

Truss     Oval    Oval Split    120°Countersunk      150°Countersunk    Full Tubular

Solid:    

Flat   Flat Countersunk   Pan    

SEMS

Washer     Mechanical Specs

Socket Products

Button    Flat     Hex Socket       Low Head Socket    Socket Shoulder    Socket Set     Socket Set Material

Hex Keys

 

Spacers

Hex Spacers                     Round Spacers    

Hex Swage Spacers         Round Swage Spacers

Tapping Screws

Type A    Type AB    Type B     Hi-Lo    Hi-Lo Head Dimensions

Hole Dimensions    Heat Treating

Bugle & Pan   Flat     Flat Undercut   Hex & Hex Washer    Oval   Square, Flat & Pan

Type U Drive Screw

THREAD CUTTING Screws

Type 1    Type 23     Type 25    Type F    Type F Floorboard    Hole Sizes

THREAD FORMING Screws

Plastite II®

Taptite II®    Taptite Hole Data 1   Taptite Hole Data 2   Taptite Hole Data 3    Taptite Hole Data 4

Washers

Flat Washers

SAE   SAE Hardened    USS    USS Hardened     Fender    316 Stainless    18-8 Stainless

Beveled    Machine Screw    Countersunk

Lock Washers

External     Internal/ External Tooth   Split Lock    Heavy Split    Countersunk External

Weld NUTS

Single Projection Weld    Multiple Projection Weld